Monthly Archives: October 2018


The Phases of Conference Preparation

The preparation of a conference can be divided into several sections („phases“). With the help of the following exemplary organization plan of a conference, we would like to help you to understand the capabilities and functionalities of ConfTool and ConfTool Pro respectively.

Subsequently you will find a short guideline of the possible phases during the preparation of the conference and the tasks that arise for the organizers. The phases are supported by ConfTool-System in varying ways and it offers specific settings, user rights and access possibilities that will also be shortly introduced here.

Phase 0 – Preparatory planning, the website, basic ConfTool settings

Phase 1 – The “Call for Papers”

Phase 2 – Submission of the contributions

Phase 3 – Bidding phase: Potential reviewers bid for contributions

Phase 4 – Assignment of contributions to reviewers

Phase 5 – Evaluation of contributions by the reviewers

Phase 6 – Discussion on the acceptance of submissions by the programme committee

Phase 7 – Planning of programme and final decision on the acceptance status

Phase 8 – Announcement of the results

Phase 9 – Submission of the final version

Phase 10 – Registration for participation


Phase 0 – Preparatory Planning, the Website, Basic ConfTool Settings


Generally, the preparation of a conference should begin at least one year before the event starts. Please also have a look at the “Guidelines for Local Conference Organizers” with general information of what local organizers should consider during planning.

Today, for most conferences, the website is certainly one of the most important sources of information for potential authors and participants. Therefore, it should be put online as early as possible, have an appealing design and must contain all relevant information in a clear way.

ConfTool Pro does not replace your conference website with the information about the conference, as for this countless excellent open-source content-management-systems are available like Joomla!Drupal, and Typo3, as well as free of charge online services like Google Sites.

Tips for your Conference Website

Your website should provide all relevant information about the conference and should always be up-to-date. Thus, your site promotes your event, and at the same time it helps you to avoid unnecessary inquiries and misunderstandings. In order for the website to make a professional impression we recommend consulting a designer for its creation.

One should be able to find at least the following information on your website:

  • General information about the conference: what is the event about, what is the focus this year, who is hosting the conference, where will it take place, and why should people submit a contribution and participate.
  • Information for authors: This includes the “Call for Papers”, details on where the contributions will be published (by whichpublishing house, in which series), and which deadlines are to be considered. Also put templates here (for example MS Word templates) for the submission; the more precise the templates are defined, the less work you will have later when compiling the conference booklet. If prizes will be given out, such as a „Best Paper Award“, it is worth indicating this.
  • Location of the conference: One should not only list information of the actual conference location but also give information about the city and the region in which the conference will take place. Write why the region is worth the journey, and which sights it offers. Furthermore, participants appreciate details of how to get to and from the given location and how to find good/cheap overnight accommodation options.
  • Participant registration: Please list the registration options here, the incurring fees (is VAT charged?) and what the fees include. Furthermore, the deadlines for the registrations and the early-bird rate should be put here, as well as the accepted methods of payment (see “Receiving Credit Card Payments“).
  • Conference programme: Although ConfTool Pro supports you with the scheduling of the conference programme from the accepted contributions, it makes sense to list the most important programme points on the conference website early and to present them in a tailored format. In addition, information on the keynote speakerssocial events and the awards show should be provided. It is advisable to create a “conference flyer” with an overview of the conference and to make it also available here as a downloadable PDF-File.
  • Contact, about us: These pages are essential for all websites.

Tips for the Installation of ConfTool

For the setting-up of ConfTool, numerous information are required. Of course, you do not need to configure all modules concurrently: for example, if conference registration will be activated at a later date (which makes most sense as hardly anyone will register before the conference programme has been fixed), you’ll only need to set up this part later.

The following data is required for installation:

  • The address of the conference website and for your ConfTool installation.
  • Which logos and which colours should be used for the ConfTool pages?
  • Which logos should appear on the invoices and letters of confirmation?
  • What is the standard contact e-mail address? It serves the users to establish contact with the organizers and is shown in the footer of the ConfTool systems. It is a good idea to create a specific conference-e-mail address so that multiple people can access the incoming mails (i.e. in case of absence).

For the following configuration of ConfTool with the web browser, further information will be necessary and queried, amongst others:

  • General data such as name, place and date of the conference.
  • What are the deadlines for the different phases? These can of course be updated later.
  • What is the e-mail address of the sender for the automatically sent confirmation e-mails from the ConfTool system?
  • The types of submissions that are supported. What are the requirements for the submission types and review forms?
  • Which payment options will be offered? Is an online payment system required? For this, an additional contract with an accordant “acquirer” is usually needed (see “Details for the Acceptance of Credit Card Payments”).
  • What is the address and tax number of the issuer of invoices?
  • If you want to support direct money transfer: What are the details of your bank account, which reason for payment should participants provide? Click here
  • What options are to be given on the registration form and what are the costs for the different groups of participants?
  • Who is responsible for which tasks of the organisation of the conference? As a result of this, who needs which access rights to the ConfTool system?


Phase 1 – The Call for Papers


The Call for Papers should be published at an early stage – preferably already at the previous year’s conference! The general conditions and deadlines must be pointed out in time to the authors to leave them enough time to write their contributions. A successful conference stems from the contributions of the authors, and therefore you should allocate enough attention to your Call for Papers.

The Call for Papers should of course also be found on your conference website. The following information is important:

  • What are the deadlines for submission, when will the authors be informed of the decisions, and by when must the final version be handed in (if necessary).
  • Which length should, or rather are, the contributions allowed to be?
  • Templates for the submission should be available, provided that the contributions are submitted as PDF or DOC files.
  • When and where (through which publisher, in which series) will the accepted contributions be published?
  • Are there prizes, i.e., a Best Paper Award?

In addition, previous participants should be contacted by e-mail, press information should be released, and the event should be indicated on other websites (i.e. your institution, associated organizations and alliances).


Phase 2 – Submission of Contributions


Once a user has registered he can post his contribution in ConfTool. During the entire submission phase, the authors are able to access, revise or withdraw their submission.

In this phase, the reviewers are not yet active but their accounts can already be set up. They can then already choose their preferred topic areas and, where applicable, use their account to submit their own contributions.


Phase 3 – Bidding Phase: Potential reviewers bid for contributions (optional)


During this period of time, reviewers and members of the programme committee are able to indicate which contributions they would like to review or, as the case may be, which contributions (based on grounds of a conflict of interests) they are unable to review. The Chairs of the programme committee try to consider these preferences when allocating contributions to the reviewers.

This phase can be skipped if contributions are assigned based on topic areas or other criteria. However, the bidding phase normally increases the quality of the reviews as it reduces the risk of reviewers having to review unsuitable or (for the individual reviewer) uninteresting contributions.


Phase 4 – Assignment of Contributions to Reviewers


In this phase, the Chairs decide which contributions will be assigned to which reviewers for inspection.

After the assignment, a bulk e-mail must be sent to the reviewers to provide them with the details of the review process, as well as deadlines.

At this stage Phase 1 is usually closed, authors must not update or submit new contributions any more.


Phase 5 – Evaluation of contributions by the reviewers


During this phase the contributions will be reviewed by the assigned reviewers. The reviewers get access to the contributions through ConfTool and can also give their evaluations online via a web form.


Phase 6 – Discussion on the Acceptance of Submissions by the Programme Committee


In this phase, the programme committee discusses and decides on the acceptance or rejection of contributions for the conference. The online forum of ConfTool can serve as a discussion platform.

The planning of the programme begins here: Which contribution is suited to which topic area and which session of the conference.


Phase 7 – Planning of programme and final decision on the acceptance status


Based on the discussion of the programme committee it has to be decided which submissions are to be accepted and to be rejected. It is also possible to define different formats of acceptance, for example, as accepted as oral presentation, as poster or work-in-progress-paper.

The planning of the programme should now be carried out and contributions should be allocated to the sessions of the conference. The event will now be scheduled and structured. Rooms will be reserved and sessions, workshops and events planned.


Phase 8 – Notification of results


After the decisions on acceptance the submissions have been made, authors will receive access to the results.

They will receive a bulk e-mail with the decisions and feedback of the reviewers (ConfTool Pro).


Phase 9 – Submission of the final version


On the basis of the comments of the reviewers, authors are now able to revise their contributions and subsequently submit the final version for the conference.

Administrators can educe the revised contributions and use them for publication on the internet, for the printed conference booklet or transfer to CDROM.


Phase 10 – Participant Registration


// Stay In Touch

There are real people behind, so if you have a question or suggestion (no matter how small) please get in touch with us:

// Subscribe and get updates

Subscribe to our newsletter and get the latest happenings at straight to your inbox!

  Delivered by FeedBurner